document number: 34048 for tec hnical questions, contact: magnetics@vishay.com www.vishay.com revision: 14-sep-09 1 inductors, commercial, molded, shielded, axial leaded ims-5 vishay dale electrical specifications inductance tolerance: 10 % standard, 5 % available insulation resistance: 1000 m minimum per mil-std-202, method 302, test condition b dielectric withstanding voltage: 1000 v ac per mil-std-202, method 301 (at sea level) percent coupling: 3 % maximum per mil-prf-15305 operating temperature: - 55 c to + 105 c features ? wide inductance range in small package ? flame retardant coating ? electromagnetic shield-finest shield available ? precision performance, excellent reliability, sturdy construction ? epoxy molded construction provides superior moisture protection ? compliant to rohs directive 2002/95/ec mechanical specifications terminals: 5 lb pull per mil-std-202, method 211, test condition a weight: ims-5 = 0.85 g maximum material specifications encapsulant: epoxy standard terminals: #22 awg, tinned copper environmental performance test conditions specifications barometric pressure c mil-std-202, meth. 105 thermal shock a-1 mil-std-202, meth. 107 flammability - mil-std-202, meth. 111 overload - mil-prf-15305 low temperature storage - mil-prf-15305 resistance to soldering heat a mil-std-202, meth. 210 resistance to solvents - mil-std-202, meth. 215 inductance range and military standard inductance range (h) material min. max. core shield 0.10 0.82 phenolic powdered iron 1.0 12 powdered iron powdered iron 15 8200 ferrite ferrite dimensions in inches [millimeters] standard electrical specifications model ind. (h) tol. (%) q min. test frequency l and q (mhz) srf min. (mhz) (1) dcr max. ( ) rated dc current (ma) (2) incremental current (ma) (3) ims-5 0.10 10 50 25.0 250.0 0.025 1790 - ims-5 0.12 10 51 25.0 250.0 0.034 1530 - ims-5 0.15 10 51 25.0 250.0 0.037 1470 - ims-5 0.18 10 50 25.0 250.0 0.047 1300 - ims-5 0.22 10 49 25.0 250.0 0.067 1100 - ims-5 0.27 10 47 25.0 250.0 0.11 855 - ims-5 0.33 10 46 25.0 250.0 0.13 780 - ims-5 0.39 10 44 25.0 250.0 0.18 670 - ims-5 0.47 10 44 25.0 235.0 0.25 565 - ims-5 0.56 10 43 25.0 210.0 0.33 490 - ims-5 0.68 10 42 25.0 190.0 0.45 420 - ims-5 0.82 10 40 25.0 180.0 0.59 370 - notes (1) measured with full length lead (2) rated dc current: based on maximum temperature rise not to exceed 15 c at + 90 c ambient (3) incremental current: the minimum typical current at which the inductance wi ll be decreased by 5 % from its initial zero dc value 1.44 0.188 [ 3 6.57 4.78] 0.025 0.002 [0.6 3 5 0.051] 0.410 0.020 [10.41 0.508] 0.162 0.010 [4.11 0.254]
www.vishay.com for technical questions, contact: magnetics@vishay.com document number: 34048 2 revision: 14-sep-09 ims-5 vishay dale inductors, commercial, molded, shielded, axial leaded ims-5 1.0 10 44 25.0 140.0 0.07 1070 - ims-5 1.2 10 44 7.9 130.0 0.10 895 - ims-5 1.5 10 44 7.9 115.0 0.12 815 - ims-5 1.8 10 44 7.9 105.0 0.14 775 - ims-5 2.2 10 44 7.9 100.0 0.19 650 - ims-5 2.7 10 44 7.9 92.0 0.28 535 - ims-5 3.3 10 44 7.9 85.0 0.35 480 - ims-5 3.9 10 44 7.9 75.0 0.40 450 - ims-5 4.7 10 44 7.9 70.0 0.55 380 - ims-5 5.6 10 44 7.9 65.0 0.72 335 - ims-5 6.8 10 50 7.9 55.0 1.02 280 - ims-5 8.2 10 50 7.9 50.0 1.32 250 - ims-5 10 10 50 7.9 46.0 1.62 220 - ims-5 12 10 55 2.5 44.0 2.00 200 - ims-5 15 10 45 2.5 49.0 0.80 315 250.0 ims-5 18 10 45 2.5 45.0 0.89 300 235.0 ims-5 22 10 45 2.5 41.0 0.96 290 220.0 ims-5 27 10 45 2.5 38.0 1.19 260 200.0 ims-5 33 10 45 2.5 34.0 1.37 240 190.0 ims-5 39 10 50 2.5 29.0 1.93 205 180.0 ims-5 47 10 50 2.5 27.0 2.11 195 175.0 ims-5 56 10 50 2.5 25.0 2.23 190 160.0 ims-5 68 10 50 2.5 21.0 2.70 170 150.0 ims-5 82 10 50 2.5 10.5 2.44 180 140.0 ims-5 100 10 50 2.5 10.0 3.12 160 120.0 ims-5 120 10 55 0.79 9.7 3.6 150 95.0 ims-5 150 10 55 0.79 8.5 4.1 140 90.0 ims-5 180 10 55 0.79 8.0 4.4 135 85.0 ims-5 220 10 55 0.79 7.5 5.0 125 80.0 ims-5 270 10 55 0.79 7.0 5.8 115 70.0 ims-5 330 10 55 0.79 6.5 6.4 110 65.0 ims-5 390 10 60 0.79 6.2 7.4 105 60.0 ims-5 470 10 60 0.79 5.7 9.5 92 58.0 ims-5 560 10 60 0.79 4.7 10.5 90 55.0 ims-5 680 10 60 0.79 4.5 11.8 80 50.0 ims-5 820 10 60 0.79 4.2 13.0 80 45.0 ims-5 1000 10 60 0.79 3.8 17.5 70 40.0 ims-5 1200 10 45 0.25 1.5 22.1 60 35.0 ims-5 1500 10 45 0.25 1.2 26.5 55 33.0 ims-5 1800 10 45 0.25 1.0 29.9 50 30.0 ims-5 2200 10 45 0.25 0.97 33.8 50 27.0 ims-5 2700 10 45 0.25 0.92 47.3 40 25.0 ims-5 3300 10 45 0.25 0.84 53.0 40 22.0 ims-5 3900 10 45 0.25 0.80 73.8 35 20.0 ims-5 4700 10 45 0.25 0.74 81.6 31 19.0 ims-5 5600 10 44 0.25 0.73 98.9 28 17.0 ims-5 6800 10 40 0.25 0.66 111.0 27 16.0 ims-5 8200 10 40 0.25 0.54 119.0 26 15.0 ordering information ims-5 10 h 10 % er e2 model inductance value inductance tolerance package code jedec lead (pb)-free standard global part number ims05 er 100 k model package code inductance value inductance tolerance standard electrical specifications model ind. (h) tol. (%) q min. test frequency l and q (mhz) srf min. (mhz) (1) dcr max. ( ) rated dc current (ma) (2) incremental current (ma) (3) notes (1) measured with full length lead (2) rated dc current: based on maximum temperature rise not to exceed 15 c at + 90 c ambient (3) incremental current: the minimum typical current at which the inductance will be decreased by 5 % from its initial zero dc value
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
